Not logged inAmerican Welding Society Forum
Forum AWS Website Help Search Register Login
Up Topic Welding Industry / Inspection & Qualification / WPQR
- - By Bryan Bidewell (*) Date 12-12-2018 08:27
What do I need in the way of a procedure that would allow me to weld 10mm Wall Thickness Circular Hollow Section to 40mm Plate, allowing for CVN essential variables?
Parent - - By 803056 (*****) Date 12-16-2018 01:06
First thing I would do is review the applicable welding standard.

Al
Parent - - By Bryan Bidewell (*) Date 12-17-2018 08:55
Yes I've done that and hit a bit of a dead end hence my post.
Parent - - By Lawrence (*****) Date 12-17-2018 14:55
You really can’t take a hint can you ?

Read your initial post like it was the first time.

Now how can anybody help you here?
Parent - By jrw159 (*****) Date 12-17-2018 15:32
Farm Code: "We don't need no stinking procedures!" :wink::grin:

jrw159
Parent - - By 803056 (*****) Date 12-18-2018 03:18
It is really a dead end when you don't know what welding standard is invoked by the customer.

Al
Parent - By bozaktwo1 (***) Date 12-28-2018 21:29
Customer?  Standard?  Can't we just take the thing-a-mabob and plug it into the doohicky o'er there, and make some sparks?
Parent - By pipewelder_1999 (****) Date 12-24-2018 11:45
A procedure that meets the requirements of the applicable code and is suitable for satisfactory welding of the production joint.

To provide any more detail requires more detail.
Up Topic Welding Industry / Inspection & Qualification / WPQR

Powered by mwForum 2.29.2 © 1999-2013 Markus Wichitill