It is published by PRI.
PRI, Performance Review Institute, an affiliate of SAE.
The document I noted, is an AUDIT CRITERIA for NADCAP.
Information in this document is as follows.
-------------------------------------------------------------------
161 Thornhill Road,
Warrendale, PA 15086-7527
PRI operating procedures provide that "This report is published by PRI to advance the state of technical, engineering, and quality sciences.
The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement
arising therefrom, is the sole responsibility of the user."
PRI invites your written comments and suggestions.
Copyright 2000 Performance Review Institute
All rights reserved. Printed in U.S.A
AUDIT CRITERIA(AC) Issued 1995-01-06
Revised 2003-12-01
Supersedes AC7110/5 REV B
REV.C AC7110/5
TO BE USED ON AUDITS AFTER DECEMBER 1, 2003
Title:
"Nadcap
AUDIT CRITERIA FOR
FUSION WELDING"
1. SCOPE
This checklist is to be used as a supplement to PRI AC7110 for suppliers seeking fusion welding accreditation. When customer requirements differ from those specified herein, the customer requirements shall take precedence.
2. GENERAL INFORMATION
Questions noted with (Info Only) following the YES NO answers are asked for information
purposes only. For (Info Only) questions, NO answers do not require the issuance of a
nonconformance report or an explanation. Questions answered as “N/A” will require an explanation.
2.1 Welding Processes
Processes performed at this facility (check appropriate boxes):
Flux Cored Arc Welding (FCAW)
Gas Metal Arc Welding (GMAW)
Gas Tungsten Arc Welding (GTAW)
Oxyfuel Gas Welding (OFW)
Plasma Arc Welding (PAW)
Submerged Arc Welding (SAW)
Shielded Metal Arc Welding (SMAW)
Foundry In-Process Completion/Repair Welding of Castings
.
.
.
.
4.6.5 Filler Material ID Charts
Are filler material identification charts clearly posted in the shop? YES NO NA
.
.
.
------------------------------------------------------------------
Thanks, for your reply.
Note: We are a manufacturer for aircraft aluminum castings.
(Foundry In-Process Completion/Repair Welding of Castings)