Stick strictly to facts and observations.
Report only the facts and information necessary to accurately report the results.
do not leave any "holes" in the reporting.
reference code paragraphs (ex. ASME sec VIII 2007 ed, QW11, para. 3(a)) to support your findings
only be as detailed as necessary
sign and date
That's all I can come up with for now..gotta go to lunch with the mistress....I mean Mrs. :)
You have gotten some good advice in this. I wanted to add-
Remember to address "who, what, when, how" in your report. Be careful with "why", it will probably be your opinion.
Try not to get wordy. Plain language, no slang and no $10 words is the best way to go.
Ask youself " Will I understand this a year from now?" If not, you don't have enough detail. But also remember that some of that detail can be in referenced drawings and specs, so you don't need to re-write that info.
Never let anger influence your report, or at least try not to. "Flaming" is bad form.
Remember: Just because they didn't do it the way you would, that doesn't mean it's wrong. The work is per the contract, or it is not, so report that way.
Don't be afraid of "white space". Plenty of separation between main points makes a report easier to read. Use new paragraphs, bullet points, etc. to make reaing your report easy on the eyes. (But make sure not to go overboard.)
If you have to go to page 2, you might lose your audience. If you have that much information to cover, try to make your points on one page and reference attachments.
Make it your practice not to rush writing your report. Some are easy, some are hard; hard ones should be started sooner. (If only I could follow my own advice on that one!).
Check your spelling. We all make mistakes. Some are from keystrokes, some are words we didn't know how to spell and forgot to check. A few mistakes are easily forgivable but lots of misspellings turn off the reader. Like it or not, that's fact and it will influence your credibility as an inspector. (I know, that should not matter - but it does and life is not fair either)
As long as your reports are clear, concise, and accurate don't worry about how "the other inspector" would have written it. You are not "the other inspector". A good clue as to whether you should re-consider your writing style is if you get phone calls to discuss your reports. You will know what you should do.
You will do just fine.
Joey,
All levels of our business are different when it comes to reporting.....You have gotten good advice from the others. Experiment with a few different formats for your reports, one may not apply on all projects.
One thing that was not mentioned ..... depending on your client, you will often find that in addition to a ITP (inspection test plan) they may have their own report templates for pre-job meetings, surveillance, release notices etc. This keeps the format the same for all of their third party inspectors.
Check your PM
~thirdeye~
Thanks to all.
Is there a reference book (recommended practice) available in the market? I believe that reference book may give you different kinds of report format and samples of inspection reports for tankage, pressure vessel, piping, structural steel etc. If don't have, then someone has to start to make now. The book will be a best seller for those welding inspectors from Japan, Korea, Germany, China, Indonesia etc.
Regards
Joey
All of the responses have offered good advice.
I would include some additional detail. Specifically, what did you inspect! What drawings were used? What code is applicable? Were the drawings approved by the EOR?
Since you will be inspecting structural steel, include what members you checked. If there was an unacceptable weld or mislocated hole, what member and what fitting was affected?
I'll never forget the inspection reports filed by an inspector on one project where I was called in as an "expert witness" by the lawyers for the plaintiff; the inspector's reports were short, simple, and to the point: "Inspected 800 inches of weld, all was accepted."
We, as the readers, have no idea of what was inspected from the information provided. However, he did make it a point to report the outside temperature and whether the sun was shining or if it was cloudy. Who cares, it was a verification inspection performed inside the shop!
Some inspections call for a narrative style report, but most needs will be served by a "checklist" style report where the member markings and the fittings are noted, and whether the assembly was noncompliant or met the requirements of the drawing. Acceptable components are easy to report, however, rejected parts require more detail as to what and why they were rejected.
Personal practices:
- I never assign blame or analyze why something is unacceptable. That isn't my function as a third party inspector. The EOR or the client might ask for my opinion, but that isn't part of the report.
- Likewise, my job as a third party inspector isn't to be the fabricator's consultant. That is, it isn't my function to tell the fabricator or the welder how to fix or repair something that was rejected.
- The inspection report is for use by the client and the EOR, it is not intended to replace the fabricator's QC responsibilities or inspection personnel.
Remember the grass is always greener on the other side of the fence. When work is plentiful, everyone wants you.
Best regards - Al
Al,
thanks for your very good advise.
Regards
Joey
Joey,
Don't use complex English in narrative reporting, plain English is okay and attach more photos in your report.
Use the same terminology and words you read in the relevant specification and codes.
Do you want to work as third party inspector in Singapore? we have opening!
Ariel D C
www.setsco.com
That little book, "Elements of Style", I believe by Strunk & White. This book has excellent tips for clear, concise writing. I re-read this book at least once a year - it's a short easy read - and my writing has improved a lot. This book is commonly assigned to college classes so you should be able to score a cheap one.
One of the difficulties I have in report writing is changing tense. Keep it in the present unless you are specifically writing about a past event. And keep your sentances declaritive (I've got to go back to my "Elements of Style"; I forgot what declaritive is).
Bob G.
Ariel D C
i have no problem as my english vocabulary is very limited.
thanks for the employment opportunity, I've been in Singapore and knew about you=)
Regards
Joey